manualshive.com logo in svg

Xerox Digital Color Press 700, User Manual

Share
Download
Xerox Digital Color Press 700 User Manual Download Page 133

User Guide

7-23

Xerox 700 Digital Color Press

Maintenance

The hole punch waste container is a catch tray that 
contains the waste drilled paper.  Your machine will prompt 
you when the hole punch waste container needs emptying. 
When pulling the punch scrap container out to dispose the 
punch scraps, ensure that all scraps are discarded. If there 
are scraps remaining, the container may be full before the 
next message is displayed. It may cause machine 
malfunctions.

This procedure shows you how to empty the hole punch 
waste container.

Make sure that the machine has stopped, and open the 
front cover of the finisher.

Emptying the Punch Scrap Container

1.

Pull out the punch scrap container.

2.

Dispose of the drilled paper scraps into the waste 
bin.

3.

Install the emptied hole punch waste container, 
ensuring that the container is inserted correctly.

That completes the procedure for emptying the hole 
punch waste container.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Digital Color Press 700

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands