manualshive.com logo in svg

Xerox Digital Color Press 700, User Manual

Share
Download
Xerox Digital Color Press 700 User Manual Download Page 200

10-4

User Guide

Xerox 700 Digital Color Press

Addendum

If a jam occurs, the machine stops printing and a message is displayed on the User Interface (UI). Follow all 
instructions displayed completely and in the sequence shown.

When a problem occurs with your Interface Module, instructions may appear on the UI; refer to the information in this 
section to help resolve the problem. 

The fault code table, which starts on the following page, lists problems and suggested solutions that apply to the 
Interface Module. If the problem persists after following all instructions, call your Xerox representative.

Jam clearance

Interface Module jams

Basic troubleshooting

Perform the following steps to clear the Interface Module jam and resume printing.

Open the Interface Module Front Cover.

Lift the green handles and/or rotate the green knob and 
remove all jammed paper and paper scraps.

Close the Interface Module Front Cover.

If the UI indicates there is a jam in the digital press, 
follow the instructions on the screen to remove any paper 
in the area indicates. Refer to the Jam Clearance section 
in the Problem Solving chapter in this manual.

Follow the instructions displayed on the digital press UI 
to resume printing.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Digital Color Press 700

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands