manualshive.com logo in svg

Xerox Digital Color Press 700, User Manual

Share
Download
Xerox Digital Color Press 700 User Manual Download Page 8

Product Overview

User Guide

1-2

Xerox 700 Digital Color Press

1

2

3

5

4

5.

3.

2.

4.

The Control Panel is divided into four areas: Touch Screen, 
Pathway buttons, Keypad and Feature buttons.

Touch Screen

The touch screen allows you to select all the available 
programing features. It also displays fault clearance 
procedures and general machine information.

Services

Allows access to the Services screen, where different features (copy, scan, etc.) can be viewed and programmed.
Access to the All Services button is also available from the services screen. This button is located in the top right 
of the touch screen.

Job Status

Displays job progress information on the touch screen.

Log In/Out

Provides password protected access to the System Administration menu used to adjust the defaults of the 
machine.

Machine Status

Displays the current status of the machine on the touch screen.

Control Panel

1.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Digital Color Press 700

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands