manualshive.com logo in svg

Xerox Digital Color Press 700, User Manual

Share
Download
Xerox Digital Color Press 700 User Manual Download Page 21

User Guide

3-1

Storage and Handling of Paper and Media

Storing paper stock

Paper

Store in a low humidity area. Damp paper may cause paper jams or poor image quality.

•

Do not open reams of paper until they are required for use. The ream wrapper contains an inner lining that 

•

protects the paper from moisture.
Store on a flat surface to prevent the paper stock from folding or curling.

•

Stack reams of paper carefully on top of one another to avoid crushing the edges. Do not stack more than five 

•

reams on top of each other.

It is important for optimum printing that paper stock is storedcorrectly. Take note of the following when storing paper 
stock:

The User Interface (UI) screens shown in this guide may or may not reflect the screens displayed on your copier/printer. 
The UI screens vary from system to system and from marketplace to marketplace. Therefore, the screens provided in 
this guide are a representation of the type of screens that may be seen on your particular system.

This section describes the proper methods for storing and handling the various paper stocks and copy-media.

Note

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Digital Color Press 700

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands