Xerox 220 Page 25 User Manual Download

Page: 25 / 280

Xerox Document Centre 220/230/332/340 User Guide

Page

1-17

About Thi

Guide

bout Thi

Guide

About

This

ide

Follow warnings and instructions marked on or supplied
with the equipment.

Locate the

Document Centre 220/230/332/340

on a

solid support surface (not on plush carpet) that has
adequate strength to support the weight of the unit.

Locate the

Document Centre 220/230/332/340

in an

area that has adequate ventilation and room for
servicing.

not

locate the

Document Centre 220/230/332/340

near a radiator or any other heat source.

not

obstruct ventilation openings. They are provided

to prevent overheating.

not

place or push objects of any kind into the

ventilation openings.

not

attempt any maintenance function that is not

specifically described in the

Document Centre

220/230/332/340

documentation.

Use materials and supplies specifically designed for
your

Document Centre 220/230/332/340

. The use of

unsuitable materials may result in poor performance and
possibly a hazardous situation.

To move or relocate the

Document Centre

220/230/332/340

to another building or location, in the

United States contact Xerox at
1-800-979-7356

Mobility and stability issues can affect

your

Document Centre 220/230/332/340

if it is not

moved properly.

not

remove the covers or guards that are fastened

with screws, except to add options.

not

operate the

Document Centre 220/230/332/340

you notice unusual noises or odors. Disconnect the
power cord from the power source receptacle, and
contact your Xerox Service Representative immediately.

Summary of Contents for 220

























































































































































































































































































Search results

Summary of Contents for 220

Reviews:

Related manuals for 220

Brands by name

Popular brands

Xerox 220, User Manual

Search results

Summary of Contents for 220

Reviews:

Related manuals for 220

Brands by name

Popular brands