Xerox 220, User Manual

Page: 239 / 280

Xerox Document Centre 220/230/332/340 User Guide Page 10-5
Pr
obl
e
m
Sol
v
ing
P
roblem Solv
ing
The machine does not display the High
Capacity Feeder (or one of the paper
trays) in the Paper Supply selections.
À
Check to see if any paper trays are
open. If a tray is ajar, the machine
cannot sense its connection.
À
Open and close each paper tray and
the High Capacity Feeder, power OFF
the machine and then power ON the
machine.
The touch screen does not display the
Finisher/Stapler option
À
Slide the Finisher to the machine. The
Document Centre configures itself
when options are attached.
The machine does not accept documents
into memory
À
Check with the Key Operator about the
available memory capacity. If the
memory is almost full, print, and delete
unnecessary files.
The machine displays a memory full error
message
À
Check with the Key Operator about
available memory.
À
Divide the remaining pages of the job
into several small jobs and run the job
again.
The machine did not enlarge an 8 1/2” x
11” document on to an 11” x 17” page
À
11” x 17” paper can only be loaded in
the trays short edge feed. Load the 8
1/2” x 11” document short edge feed.
The machine cannot rotate an image
on 11” x 17” paper. It only rotates
images on to 8 1/2” x 11” long edge
feed paper.
À
Select a percentage for enlargement.
Symptom Recommendation