Xerox 220 Page 26 User Manual Download

Page: 26 / 280

Page

1-18

About This Guide

Ground Fault Interrupter (GFI)

If a fault is detected in the power supply to the

Document

Centre 220/230/332/340

, a Ground Fault Interrupter (GFI)

device on the machine removes all electrical power. If power
is interrupted, locate the GFI on the right side of the
machine, toward the back.

If the GFI has been activated:

- on the

Document Centre 220/230

the switch will be in

the down position.

- on the

Document Centre 332/340

the switch will be in

left position.

Flip the switch to restore power to the machine.

If the GFI interrupts power to the machine again, or if power
has not been restored by this procedure, call your Xerox
service representative.

Document Centre
220/230

Document Centre
332/340

Summary of Contents for 220

























































































































































































































































































Search results

Summary of Contents for 220

Reviews:

Related manuals for 220

Brands by name

Popular brands

Xerox 220, User Manual

Search results

Summary of Contents for 220

Reviews:

Related manuals for 220

Brands by name

Popular brands