Xerox Document Centre 220/230/332/340 User Guide
Page
8-7
Paper and other
me
d
ia
Paper an
d
o
th
e
r
Paper an
d
o
th
e
r
The Bypass Tray
The Bypass Tray can be used for a variety of different media
stock. Refer to the table on
Page 8-15
for more information
.
The Bypass Tray is located on the left hand side of the
machine, below the Left Tray
.
A tray extension, to
accommodate larger paper, is provided.
To change the attributes for the Bypass Tray, place the
paper in the Bypass Tray. The tray senses the paper and the
machine displays a confirmation pop-up window on the
touch screen to change the attributes.
NOTE:
To reduce unnecessary fuser and paper feed jams it
is important that the paper size, color and type programmed
in the
Change Attributes
window for the Bypass Tray is
identical to the paper stock loaded in the tray.
Bypass Tray with the Left Tray
À
Following the copier labels,
load the paper neatly into the
bypass tray ensuring that the
paper stack is registered to
the front right hand corner.
Take care not to fill the tray
above the fill line.
À
Slide the rear guide towards
the paper until it is just
touching the edge of the
stack.
Summary of Contents for 220
