Xerox 220 User Manual Download Page 84

Page: 84 / 280

Page

3-20

Copy

Reduce / Enlarge options

100% size for size copies.

Auto automatically reduces / enlarges the document to fit on the

paper size selected.

When

Auto

Reduce/Enlarge

is selected

the

Document

Centre 220/230/332/340

automatically selects 8 1/2” x 11”

long edge feed paper. If selecting

Auto

Reduce/Enlarge

and

8 1/2” x 11” paper supply, either short edge feed or long edge
feed can be selected as the output. The

Document Centre

220/230/332/340

automatically rotates the image 90° to

match the orientation of the 8 1/2” x 11” documents and
prints on to 8 1/2” x 11” long edge feed paper.

Presets to save programming time a choice of the two most

frequently used preset reduce / enlarge settings are
available on the

first Copy

screen.

Other used to specify a magnification not listed, or select normal or

custom settings.

Normal—

reduces or enlarges the length and width of

a document by a specific amount. 100%, Auto and the
presets are also available.

To select Auto or one of the
presets, touch the required
option.

Summary of Contents for 220

























































































































































































































































































Search results

Summary of Contents for 220

Reviews:

Xerox 220, User Manual, Page: 84 / 280

Search results

Summary of Contents for 220

Reviews: