Xerox 220 User Manual Download Page 247

Page: 247 / 280

Xerox Document Centre 220/230/332/340 User Guide

Page

10-13

obl

Sol

ing

roblem Solv

ing

Paper jams

Check to see if the paper is loaded
correctly. Flip the paper over in the
paper tray.

Check to see if the paper tray guides
are locked into position.

Do not use media that is torn, wrinkled,
or folded.

Load fresh paper.

Paper curls

Check to see if the paper is loaded
correctly. Load paper in Paper Trays 1,
2, 3 and 4 seam side up.

Load paper in the High Capacity
Feeder and Bypass Tray seam side
down.

Load non-standard media in the
Bypass Tray.

Refer to

“Paper and other media” on

Page 8-1

for procedures.

With an external control device con-
nected (such as a coin-operated device),
the machine displays a

Ready to copy

message, but users cannot log in

Check the external control device to
ensure that it is properly connected
and powered on.

Can’t store a document for secure polling
due to memory full

Delete any jobs stored in the Failed
Fax queue

(Document Centre 220/230

only)

Cancel the operation and try again
later when additional memory is
available.

Symptom

Recommendation

Summary of Contents for 220

























































































































































































































































































Search results

Summary of Contents for 220

Reviews:

Xerox 220, User Manual, Page: 247 / 280

Search results

Summary of Contents for 220

Reviews: