manualshive.com logo in svg

Xerox 220, User Manual, Page: 226 / 280

Share
Download
Xerox 220 User Manual Download Page 226

Page

 

9-10

Maintenance

CAUTION To avoid spills, do not remove the sealing tape until the 

Copy/Print Cartridge is completely in place.

À

Holding the cartridge by its 
handle, slide it into the frame 
in the machine. (It should fit 
like a puzzle piece.) Let go of 
the handle as you slide the 
Copy/Print Cartridge all the 
way to the back of the frame. 
It should click into place.

À

Pull the colored tab to 
remove the sealing tape from 
the cartridge. It is located on 
the front of the cartridge. 

À

Close the Left Front Cover.

NOTE: 

The Left Front Cover 

will not close if the cartridge is 
not completely in place.

À

Close the Upper Left Cover.

IF FITTED

À

Close the Duplex Module. 

À

Slide the Finisher and High 
Capacity Feeder back in to 
place.

Summary of Contents for 220

























































































































































































































































































Reviews:

No comments