Xerox 220 User Manual Download Page 47

Page: 47 / 280

Xerox Document Centre 220/230/332/340 User Guide

Page

2-17

oduction

Int

roduct

ion

Features button

Press this button to access the features available on your

Document Centre 220/230/332/340

. The first screen for

each tabbed feature contains all the basic settings required
for each feature. For example, the first

Copy

screen

enables

programming to

make a copy and the first

Fax

screen to

send a fax. The additional screens provide settings to allow
further programming selections.

Press the

Features

button on

the control panel to display
the default screen.

NOTE:

The first Copy screen is

normally the default setting.
This can be changed by the
Key Operator.

Summary of Contents for 220

























































































































































































































































































Search results

Summary of Contents for 220

Reviews:

Xerox 220, User Manual, Page: 47 / 280

Search results

Summary of Contents for 220

Reviews: