Xante Assel-a-Writer-8300, Instruction Manual

Page: 188 / 338

5-20 Configuration bb ______________________________________
The LocalTalk, EtherTalk, and
LPR (Line Printer) Menus
INTERFACES
XXXX*
* XXXX = LTALK, ETALK, or LPR
ENABLE
MODE
SPOOL
The LocalTalk menu allows you to configure
the printer’s LocalTalk interface. The
EtherTalk and LPR menus allow you to
configure the printer’s Ethernet interface.
The Enable Menu
XXXX*
ENABLE
YES
no
* XXXX = LTALK, ETALK, or LPR
The Enable menu allows you to enable (YES)
or to disable (NO) the printer’s LocalTalk
interface and the EtherTalk and Line Printer
protocols on the printer’s Ethernet interface.
The factory default for LocalTalk is YES. The
factory default for EtherTalk and LPR is YES
if the Ethernet board is installed properly.
The Mode Menu
XXXX*
MODE
PS STD
* XXXX = LTALK, ETALK, or LPR
The Mode menu specifies PostScript
Standard (PS STD) as the active printer
mode for files sent to the printer’s LocalTalk
or Ethernet interface.
The Spool Menu
XXXX*
SPOOL
YES
no
* XXXX = LTALK, ETALK, or LPR
The Spool menu allows you to enable (YES)
or to disable (NO) the spooling feature for the
printer’s LocalTalk or Ethernet interface. The
factory default is NO. See “The Spooler” in
chapter 3 (Macintosh) or chapter 4 (PC).