Xante Assel-a-Writer-8300, Instruction Manual

Page: 224 / 338

7-18 Using Media and Toner b ________________________________
Adjusting Toner Output
If your printer does not produce the rich, black images that you
expect, the toner may have settled in the cartridge or you may need
to adjust the print density.
Redistributing Toner
If the toner cartridge has not been used in several days, the toner may
have settled in the cartridge. Remove the toner cartridge from the
printer, gently rock it back and forth to redistribute the toner
throughout the cartridge, and then replace it in the printer. “The
Toner Cartridge” in chapter 2 contains instructions and illustrations
for this process.
Changing the Density Menu
If redistributing the toner in the cartridge does not resolve the problem,
you can lighten or darken the amount of toner laid down by the printer
through the front panel Density menu. The options are 1 through 7.
Increasing the numeric setting increases the density of the toner applied.
See chapter 5 for instructions on using the front panel menus.
Note: Check the Density menu setting when you replace a toner
cartridge. The setting required for the previous cartridge may
be too high or low for the new cartridge. We suggest
switching back to the factory default of 5.
◊◊◊