Xante Assel-a-Writer-8300, Instruction Manual

Page: 171 / 338

_______________________________________ Configuration 5-3
Introduction
This chapter describes the printer’s front panel and explains how to
use it to configure printer features.
Printer Control
Many printer features can be set from the Print dialog box within an
application. These application settings override the printer’s default.
The default settings for the printer can be changed using the printer’s
front panel menus and, for some features, XANTÉ Command
Center.
This chapter describes how to configure your printer’s default
settings using the front panel. For information about setting the
options that are available from the Print dialog box, see chapter 6,
“PPD Options.” For information about using XANTÉ Command
Center, see chapter 3 (Macintosh) or chapter 4 (PC).
The Front Panel
The printer’s front panel has a display window, status lights, and
control keys (fig. 5.1).
ON LINE
®
FORM
FEED
RESET TEST MENU ENTER
TRAY
SELECT
DATA MANUAL READY
DUPLEX
DUPLEX
™
™
® ®
Fig. 5.1 The Printer Front Panel
When your printer is powered on, all the lights flash and the printer
performs self-diagnostic tests which take approximately 90 seconds.
If the start-up page is enabled (factory default), it prints. When
READY/IDLE
appears in the window, the printer is ready to accept
a job.