Xante Assel-a-Writer-8300, Instruction Manual

Page: 279 / 338

______________________ Application Notes and Page Design B-7
Printer Type: hold down the shift key and select the Non-
italicized name of your printer.
Paper Size: select the same size as you did for Paper if
you chose the name of your printer under
Printer Type. The top may be the size name
and the bottom the measurement; for
example, Paper = Tabloid and Paper Size =
11 x 17. If you chose Generic B&W, there is
no Paper Size option.
Note: Resolution cannot be changed in the page setup box; it
has no effect on the printer. Printer resolution must be
set in the Print Options dialog box.
4. Click OK. Then select Print from the File menu. The Print
dialog box appears.
5. Click Options. Then, make the following selections.
PostScript Errors: Select Print Detailed Report
Resolution: Select the desired resolution supported by
your printer
Note: Set other options, such as Enhanced Screen, Gamma,
and Tray Switch as desired.
6. Click OK. Then, click Print.
Screen Frequency and Angle in QuarkXPress
You can adjust the screen frequency and the screen angle in the Page
Setup dialog box. We recommend you set the screen angle at 45˚ and
the screen frequency range between 60 lpi and 106 lpi. The printer’s
default is 85 lpi.
Also, resolution plays a role in selecting lpi. A high lpi, such as 105,
will produce better output at a higher resolution such as 1200 x 1200
dpi. For more information on lpi selection, see chapter 8, “Advanced
Features.”