Xante Assel-a-Writer-8300 Instruction Manual Download

Page: 29 / 338

__________________________________________

Installation 2-5

Unpacking the Printer

You may want to save the packing materials that protect your printer
during shipping to use if you have to move or ship the printer.

Remove everything except the printer in its protective bag
from the shipping box.

Warning!

The printer weighs approximately 33 lbs (15 kg)
without the toner, cassettes, and media installed. Have
someone help you lift it.

Lift the printer out of the box.

Remove the plastic wrap from around the printer.

Remove the packing tape from the outside of the front manual
feed tray and the back cover.

Open the top cover by pressing the release latch on the right
side of the printer and tilting the cover up and back (fig. 2.1).

Fig. 2.1 Open the Top Cover

Summary of Contents for Assel-a-Writer-8300



















































































































































































































































































































































Search results

Summary of Contents for Assel-a-Writer-8300

Reviews:

Related manuals for Assel-a-Writer-8300

Brands by name

Popular brands

Xante Assel-a-Writer-8300, Instruction Manual

Search results

Summary of Contents for Assel-a-Writer-8300

Reviews:

Related manuals for Assel-a-Writer-8300

Brands by name

Popular brands