manualshive.com logo in svg

Xante Assel-a-Writer-8300, Instruction Manual

Share
Download
Xante Assel-a-Writer-8300 Instruction Manual Download Page 189

_______________________________________

 Configuration  5-21

The Novell PServer (Novell
Print Server) Menu

INTERFACES
NOVELL PSERVER

ENABLE
MODE
PROTOCOL
SPOOL
TIMEOUT

The Novell PServer menu allows you to
enable and configure the printer’s Ethernet
interface for Novell Print Server emulation.

The Enable Menu

NOVELL PSERVER
ENABLE

YES

no

The Enable menu allows you to enable (YES)
or to disable (NO) the Novell Printer Server
emulation on the printer’s Ethernet interface.
The factory default is NO.

The Mode Menu

NOVELL PSERVER
MODE

PS STD

The Mode menu specifies PostScript Standard
(PS STD) as the active printer mode for files
sent using the Novell Print Server protocol on
the Ethernet port.

The Protocol Menu

NOVELL PSERVER
PROTOCOL

802.3
no snap

The Protocol Menu allows you to select 802.3
or 802.2 (NO SNAP) as the Novell protocol
frame type used on your network. The factory
default is 802.3.

The Spool Menu

NOVELL PSERVER
SPOOL

YES
no

The Spool menu allows you to enable (YES)
or to disable (NO) the spooling feature for the
Novell Print Server emulation on the Ethernet
interface. The factory default is NO. See “The
Spooler” in chapter 3 (Macintosh) or chapter 4
(PC).

Summary of Contents for Assel-a-Writer-8300



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands