Xante Assel-a-Writer-8300, Instruction Manual

Page: 87 / 338

_____________________________________ Macintosh Setup 3-19
Note: This does not enable the Spooler feature on your
printer. The Spooler must be enabled on the
printer, using either the front panel Interfaces
menus (see chapter 5) or XANTÉ Command
Center (see “The Spooler” later in this chapter) for
the Save Spooled Job feature to function properly.
c. Select the amount of RAM that is installed on your
printer.
6. Click OK to confirm your configuration and close the
Installable Options screen.
7. Click OK to close the PPD setup dialog box; then, close the
Chooser window.
Note: When you add a printer from the network, go through either
the Auto Setup or manual setup procedure to ensure that the
printer is recognized by the network.
Configuring the Printer
If necessary, configure the printer’s communication interface using
the front panel. See Chapter 5, “Configuration,” for details.
1. Select the
SETUP:INTERFACES
menu.
2. Select the menu for the printer interface that is connected to
your computer (
LOCALTALK
or
ETHERTALK
).
3. Select the
ENABLE
menu.
4. Select the
YES
option.
5. Press the Reset key until
READY/IDLE
appears in the display.