Xante Assel-a-Writer-8300, Instruction Manual

Page: 137 / 338

___________________________________________ PC Setup 4-21
a. Select the defaults for the Properties menu in your
application Print dialog box from the Printer features
section. See chapter 6, “PPD Settings,” for a description
of these menus.
b. Select Installed for the upgrades that are installed on
your printer, such as optional trays, the extra wide print
upgrade, and the optional duplexer (Accel-a-Writer 8300
only).
c. Select True for Spooler Enabled to enable the Save
Spooled Job menu in your application Print dialog box.
Note: This does not enable the Spooler feature on your
printer. The Spooler must be enabled on the
printer, using either the front panel Interfaces
menus (see chapter 5) or XANTÉ Command
Center (see “The Spooler” later in this chapter) for
the Save Spooled Job feature to function properly.
d. Select the amount of RAM that is installed on your
printer using the VMOption menu.
4. Click the Graphics tab and set the printer’s default resolution.
5. Click the Details tab and make the following changes for a local
printer. These options are not available for a networked printer.
a. Under Timeout, make sure the settings are
Not Selected: 300
Transmission Retry: 900
b. Click Spool Setting and select the following options;
then click OK to close the Spool Settings Window.
Spool Data Format: RAW
Disable bidirectional support for this printer (selected)
6. Click the PostScript tab.