Xante Assel-a-Writer-8300, Instruction Manual

Page: 175 / 338

_______________________________________ Configuration 5-7
TRAY
SELECT
The Tray Select key is used to change the
default paper tray. When you press this key,
the first tray that appears in the window is the
current tray selection. Press the Tray Select
key to toggle between trays. The options are
man feed
(manual feed tray),
cassette
(standard cassette),
upper optional,
and
lower optional
. The last two selections
appear only if these optional trays are
installed.
Note: The tray options do not appear in all capital
letters in the display window. The print icon
LEDs indicate the current selection.
DUPLEX
The Duplex key is used to set the printer for
simplex (single-sided) printing, edge-duplex
(double-sided, side-to-side, book style)
printing, or tumble (double-sided, flip chart
style) printing (Fig. 7.2). Press the Duplex key
to display the current selection in the window.
Press the Duplex key again to scroll through
the options. To select an option as the default,
press the Duplex key until the desired option is
displayed; then, press the Enter
↓
key or allow
the printer to return automatically to the
Ready/Idle state.
Note: The Duplex key options appear in lower
case letters in the window. The Duplex
LED is on if the printer is in edge- or
tumble-duplexing mode; it is off when in
simplex mode.