Xante Assel-a-Writer-8300, Instruction Manual

Page: 256 / 338

A-10 Troubleshooting bb ____________________________________
b. Check for a jam; if found, gently pull the jammed media
up and out (fig. A.8). Then, close the top cover.
1
2
Fig. A.8 Remove Media from the Back Unit
4. Check the area between the back unit and printer for a jam
using the following procedure.
a. Pull out the back cover release latch and slide the back
unit open as far as it will go (fig. 2.12).
b. Look for the jam; if found, pull the jammed media
forward, up, and out (fig. A.9).
Fig. A.9 Remove Media from between the Back Unit and Printer
c. Close the duplexer by sliding it back into place, making
sure the back unit fits against the printer.
Note: Leaving a gap between the duplexer’s back unit
and the printer will cause another paper jam or
prevent the duplexer from operating properly. A
message of
Cover Open
or
Paper Jam
appears in the window.