Xante Assel-a-Writer-8300, Instruction Manual

Page: 53 / 338

__________________________________________ Installation 2-29
a. Make sure the size indicator label on the front of the
cassette displays the correct setting. The green dial on
the top left at the front of the cassette controls the label.
To change this setting, roll the green dial forward until
the correct size appears on the label (fig. 2.27; a).
The green dial changes the size indicator label and sets
keys that notify the printer engine of the media size
configuration. This dial has three settings that can be used
for letter (LTR), and one setting each for executive (EXE),
legal (LGL), and 11" x 17" paper sizes.
Note: If this setting is incorrect, printing errors can
occur or the image may be printed incorrectly
on the media.
b. Make sure the pointer on the right media guide is set for
the correct media size. To change this setting, adjust the
two green side guides (fig 2.27; b).
c. Make sure the back media guide is set for the correct
media size (fig. 2.27; c). To change this setting, tilt the
bar forward to free the three bottom tabs; then, lift out
the bar. With the bar still tilted forward, align it over the
correct setting, slide the tabs into the slots, and tilt the
bar upright into position.