Xante Assel-a-Writer-8300, Instruction Manual

Page: 269 / 338

______________________________________ Troubleshooting A-23
§ When duplexing, toner does not fix properly on the paper.
∞
Possible Solution:
• Pull out the back cover release latch and slide the
back unit open as far as it will go; then, locate the
duplexer’s mode switch (fig. A.12).
• Set the mode switch to 2 before printing. Then,
switch it back to 1 when you finish printing.
Fig. A.12 The Mode Switch
§ When duplexing, toner scatters on the paper.
∞
Possible Solution:
• Pull out the back cover release latch and slide the
back unit open as far as it will come; then, locate
the duplexer’s mode switch (fig. A.12).
• Set the mode switch to 2 before printing. Then,
switch it back to 1 when you finish printing.