Xante Assel-a-Writer-8300, Instruction Manual

Page: 96 / 338

3-28 Macintosh Setup bb ____________________________________
AppleTalk
The following options in this menu allow you to configure the
AppleTalk protocol on your printer’s optional Ethernet interface.
• Printer Name—allows you to set the name your printer
advertises on the network.
• EtherTalk Zone Name—allows you to change the default zone
assigned to your printer by the network router. This option
should only be used by (or at the direction of) your Network
Administrator. See the Ethernet Upgrade manual that is shipped
with the upgrade package for instructions.
TCP/IP
The following options in this menu allow you to enable the TCP/IP
protocol and set the TCP/IP address on your printer’s optional
Ethernet interface.
• Address—allows you to change your printer’s default TCP/IP
address to one that agrees with the TCP/IP addressing system on
your network.
• LPR Enable—allows you to enable or disable the Line Printer
protocol on your printer’s optional Ethernet interface. The Line
Printer menu on the printer’s front panel is another method to
enable or disable LPR. See chapter 5, “Configuration.”
The Color Menu
The Color menu allows you to create custom gamma curves to
calibrate your printer’s grayscale output for specific ink, media, and
environmental conditions (fig. 3.11). Two of the three Color menu
options, Transfer Curve and CRD Directories, are for use only with
XANTÉ’s wide-format hardware RIP, the Accel-a-Graphix CT4.
Fig. 3.11 Color Menu Options