Xante Assel-a-Writer-8300, Instruction Manual

Page: 163 / 338

___________________________________________ PC Setup 4-47
6. Print another calibration strip and measure it with the
densitometer to verify the accuracy of the curve you created. If
the measured densities differ from the standards by more than
3%, repeat the calibration process.
7. Click Close to close the Linearization window; then select
Exit from the File menu to quit XANTÉ Command Center.
Note: To reset a custom gamma curve to the factory default (a
copy of the standard Gamma 0 curve), highlight the curve in
the Update Transfer Curve list and click Reset Curve (K).
Accurate Calibration Technology
This option allows you to calibrate printed line lengths using XANTÉ’s
patent pending X•ACT feature. Your printer is calibrated before it is
shipped, but it may drift out of alignment over time. After using X•ACT
to calibrate the line lengths, always adjust the alignment of the
imageable area using the Align Paper option in XANTÉ Command
Center.
1. Open XANTÉ Command Center; then select X•ACT from the
Controller menu to open the X•ACT window.