Weinmann MEDUMAT Standard2, Instructions For Use Manual

Page: 45 / 272

WM
6807
1
0
5
/2
021
MEDUMAT Standard
2
EN 45
4 Preparation and operation
4 Preparation and operation
4.1 Mounting the device
The device is mounted on a portable unit as standard and is ready
for use. Observe the instructions for use of the portable units.
4.2 Connecting to a power supply
1. Check battery status (see "4.3 Using the rechargeable
battery", page 46) .
2. If necessary: Charge battery (see "4.3.2 Charging the battery
in the device", page 46) .
3. Slide full battery into the battery compartment until it clicks
into place.
Loss of power due to combination of the device with
an incorrect power supply unit!
If you use a portable unit with the device combination
MEDUMAT Standard
2
and MEDUCORE Standard or
MEDUCORE Standard
2
, a loss of power may occur in the devices
in the event that these are used with a 50 W power supply unit.

Use only the more powerful 100 W power supply unit when
combining the devices MEDUMAT Standard
2
and
MEDUCORE Standard.
FILT
ER