Weinmann MEDUMAT Standard2 Instructions For Use Manual Download

Page: 127 / 272

6807

021

MEDUMAT Standard

127

6 Operator menu

Exporting data to an SD card

Requirement

•

An SD card is in the SD card slot.

•

The operator menu has been called up

(see "6.1 Navigating

the operator menu", page 120)

1. Select the menu item

Import/export

2. Select the

Export service data

submenu item.

Select the

Export configuration

submenu item.

The device automatically begins to export the desired data to
the SD card.

3. Once the export has concluded: Press the navigation knob

to confirm that all of the data has been correctly exported.

4. To leave the operator menu, press the

back

navigation knob.

5. Remove the SD card

(see "4.14.2 Removing the SD card",

page 98)

Result

The desired data are on the SD card.

Importing a configuration onto a device

Requirement

•

There must be an SD card with the desired configuration in the
SD card slot.

•

The operator menu has been called up

(see "6.1 Navigating

the operator menu", page 120)

1. Select the menu item

Import/export

2. Select the

Import configuration

submenu item.

The device automatically begins to import the configuration
from the SD card.

3. Once the import has concluded: Press the navigation knob

to confirm that the configuration has been correctly imported.

4. To leave the operator menu, press the

back

navigation knob.

5. Remove the SD card

(see "4.14.2 Removing the SD card",

page 98)

Result

The desired configuration is now on the device.

Summary of Contents for MEDUMAT Standard2

















































































































































































































































































Search results

Summary of Contents for MEDUMAT Standard2

Reviews:

Related manuals for MEDUMAT Standard2

Brands by name

Popular brands

Weinmann MEDUMAT Standard2, Instructions For Use Manual

Search results

Summary of Contents for MEDUMAT Standard2

Reviews:

Related manuals for MEDUMAT Standard2

Brands by name

Popular brands