WEG CFW-11 Series, Programming Manual

Page: 23 / 307

Quick Parameter Reference, Faults and Alarms
0-15
0
Parameter Function Adjustable Range Factory Setting
User
Setting
Properties Groups Pag.
P0278 DO4 Function 0 = Not Used
1 = N* > Nx
2 = N > Nx
3 = N < Ny
4 = N = N*
5 = Zero Speed
6 = Is > Ix
7 = Is < Ix
8 = Torque > Tx
9 = Torque < Tx
10 = Remote
11 = Run
12 = Ready
13 = No Fault
14 = No F070
15 = No F071
16 = No F006/21/22
17 = No F051/54/57
18 = No F072
19 = 4-20mA OK
20 = P0695 Value
21 = Forward
22 = Proc. V. > PVx
23 = Proc. V. < PVy
24 = Ride-Through
25 = Pre-Charge OK
26 = Fault
27 = Time Enab > Hx
28 = SoftPLC
29 = Not Used
30 = N>Nx/Nt>Nx
31 = F > Fx (1)
32 = F > Fx (2)
33 = STO
34 = No F160
35 = No Alarm
36 = No Fault/Alarm
37 to 42 = Not Used
0 CFG 41 13-20
P0279 DO5 Function See options in P0278 0 CFG 41 13-20
P0281 Fx Frequency 0.0 to 300.0 Hz 4.0 Hz - 41 13-26
P0282 Fx Hysteresis 0.0 to 15.0 Hz 2.0 Hz - 41 13-26
P0283 DO2 ON Time 0.0 to 300.0 s 0.0 s - 41 13-26
P0284 DO2 OFF Time 0.0 to 300.0 s 0.0 s - 41 13-26
P0285 DO3 ON Time 0.0 to 300.0 s 0.0 s - 41 13-26
P0286 DO3 OFF Time 0.0 to 300.0 s 0.0 s - 41 13-26
P0287 Nx/Ny Hysteresis 0 to 900 rpm 18 (15) rpm - 41 13-27
P0288 Nx Speed 0 to 18000 rpm 120 (100) rpm - 41 13-27
P0289 Ny Speed 0 to 18000 rpm 1800 (1500) rpm - 41 13-27
P0290 Ix Current 0 to 2 x I
nom-ND
1.0 x I
nom-ND
- 41 13-27
P0291 Zero Speed Zone 0 to 18000 rpm 18 (15) rpm - 35, 41, 46 13-27
P0292 N = N* Band 0 to 18000 rpm 18 (15) rpm - 41 13-28
P0293 Tx Torque 0 to 200 % 100 % - 41 13-28
P0294 Hx Time 0 to 6553 h 4320 h - 41 13-28