WEG CFW-11 Series, Programming Manual

Page: 191 / 307

13-9
13
Digital and Analog Inputs and Outputs
Description:
These parameters set the functions of the analog outputs, according to the Table 13.3 on page 13-9 .
Table 13.3 - Analog output functions
Functions
P0251
(AO1)
P0254
(AO2)
P0257
(AO3)
P0260
(AO4)
Speed Reference 0 0 0 0
Total Reference 1 1 1 1
Real Speed 2* 2 2* 2
Torque Current Reference (Vector Mode) 3 3 3 3
Torque Current (Vector Mode) 4 4 4 4
Output Current (with a 0.3 second filter) 5 5* 5 5*
PID Process Variable 6 6 6 6
Active Current (V/f or VVW Mode, with a 0.1 second filter) 7 7 7 7
Output Power (with a 0.5 second filter) 8 8 8 8
PID Setpoint 9 9 9 9
Torque Current > 0 (Vector Mode) 10 10 10 10
Motor Torque 11 11 11 11
SoftPLC 12 12 12 12
PTC 13 13 - -
Not Used 14 and 15 14 and 15
13, 14, 15
and 22
13, 14, 15
and 22
Motor Ixt 16 16 16 16
Encoder Speed 17 17 17 17
P0696 Value 18 18 18 18
P0697 Value 19 19 19 19
P0698 Value 20 20 20 20
P0699 Value 21 21 21 21
PLC11 22 22 - -
Id* Current 23 23 23 23
Exclusive WEG Use - - 24 to 71 24 to 71
* Factory Setting
P0252 – AO1 Gain
P0255 – AO2 Gain
P0258 – AO3 Gain
P0261 – AO4 Gain
Adjustable
Range: 0.000 to 9.999 Factory
Setting: 1.000
Properties:
Access groups
via HMI:
07 I/O CONFIGURATION or 01 PARAMETER GROUPS
39 Analog Outputs 39 Analog Outputs
Description:
They adjust the analog output gains. Refer to the Figure 13.3 on page 13-10 .