Volvo EVSE-VX, Accessories User Manual, Page: 27 / 194

Charging station
en-GB
Use
The charging output is adjusted according
to the vehicle's needs.
If the vehicle is being charged, the light
indicator pulses with a white light at
approximately two-second intervals.
– Always check that the charging station
indicates that the vehicle is being
charged.
When the vehicle is fully charged, the light
ring lights white continuously.
Your vehicle has an indicator on the
instrument panel that can verify whether
the vehicle is fully charged. See the
vehicle's user manual for the location of
the indicator on the instrument panel.
– Disconnect the charger when charging
is complete. Press the release button
on the charging handle (only SAE), and
remove it from the vehicle.
– Ensure that any snow is removed from
the docking port before replacing the
charging handle.
Note!
The light ring lights in red if the vehicle
is not being charged. The charging
station is switched off if the circuit
breaker or ground fault breaker is
triggered.
Note!
If charging with the charging station
does not work, try charging with the
charging cable supplied with the
vehicle.
Note!
The charging capacity is dependent on
the ambient temperature.
Manual disconnection
See the owner's manual for the vehicle for
how to stop charging.
Then remove the charging handle from
the vehicle.
Depress the release button on the
charging handle (SAE), and remove the
handle from the vehicle. IEC connections
do not have a release button, simply pull
out the charging handle.
The white LED lamp lights to indicate that
the charging handle has been removed
from the vehicle.
25