VeEX UX400, User Manual

Page: 22 / 209

5.0 Basic Set up and Common Tasks
When the UX400 unit is powered on, its system boots up and the first screen displayed shows an image of all the modules installed in the unit. Up to six tests can be
assigned at any given time to be run on the unit.
Main Modules Screen
Go back to top Go back to TOC
5.1 Home Screen Tabs
- On the top left hand side of the screen; to enter the system settings and tools screen
- Go back to the screen displaying the installed test modules
- Go to the home screen of a Test Application assigned to one of the tabs on the bottom of the screen
- Displays the power status of the unit - on AC Power, battery status
- Save to files
Go back to top Go back to TOC
5.2 Common Tasks
5.2.1 Assigning Test Modules
UX400 can simultaneously run up to six tests. There are six test tabs on the bottom of the unit's screen. A different test module can be assigned to each of these tabs.
Test Tabs
1. Click on a free test tab.
An arrow in the top right corner of the tab indicates the selected tab.
2. Select a test module from those displayed on the screen.
All the test technology options available through that module will be displayed.
Test Module Selection
UX400 10G e-Manual D07-00-058P RevA00 Page 22 of 209