VeEX UX400, User Manual

Page: 10 / 209

2.0 Introduction to UX400
VeEX® UX400 is the industry’s most flexible, compact, and future-proof test solution for OTN, SDH, SONET, PDH, T-Carrier,
Carrier Ethernet, Mobile Backhaul, Core, and Storage Area Networks. VeEX UX400 is the first truly robust portable platform to
offer test capabilities ranging from DS1/E1 to 100GE and beyond, allowing any combination of test modules tailored for each
particular application or set of requirements. Its versatile and flexible hardware and software architecture optimize configurations
to meet users’ specific needs; from transport applications at rates ranging from DS1/E1 to OC-768/ STM-256, OTU3 and OTU4 to
Carrier and Ethernet Transport applications from 10M to 40GE/100GE and beyond.
Its modular architecture allows for up to six independent test modules and up to six concurrent tests or combination of tests. It
also allows simultaneous local and remote users to share the platform and run independent tests, maximizing the use of
resources.
Key Features of UX400:
Industry’s smallest and most powerful 1.5Mbps to 100G test platform
Supports OTU4/OTU3, 40/100GE, 10GE, 1000Base-X, 10/100/1000Base-T, SDH/SONET up to STM-256/OC-768,
and PDH/DSn test interfaces without having to change modules
Large high resolution 10.4” color touch screen VGA monitor port, microphone/headset, built-in speaker
Built-in GPS timing and Atomic (Rubidium) clock
Provide accurate and stable timing reference when an office clock is not available (e.g. Mobile Station)
Verify the accuracy of a received network clock
Intel Atom 1.6GHz Processor
2GB DDR, 8GB SDD (up to 32GB)
High capacity Li-ion battery pack
>1 hour @ 40G, >8 hours @ 1GE
Battery operation at all rates
1000Base-T management port
Dual USB 2.0 ports
WiFi, 3G UMTS modem, Bluetooth, Memory stick
VFL and OPM hardware options
Weighs <15kg fully loaded including battery
Dual ports to monitor network bi-directionally
PDH/DSn/SDH/SONET from E1/T1 to 40G
OTN from OTU1 to OTU4
Ethernet from 10Base-T to 100GE
Ge/- 150ppm clock offset to stress both Ethernet and SDH networks
Jitter and Wander analysis up to STM-1e rates
SyncE and IEEE 1588v2 support with Wander analysis
Pulse mask analysis on PDH/DSn signals
Multiple remote and local users able to share platform for simultaneous testing
Multiple Test Applications and Users
Independent configuration and operation of modules allows multiple users to share platform
Up to 6 test applications can be configured and operated simultaneously, locally and remotely
SCPI remote control interface via IP connection for multiple user/applications
Go back to TOC
UX400 10G e-Manual D07-00-058P RevA00 Page 10 of 209