VeEX UX400, User Manual

Page: 89 / 209

Traffic Flow:
Only Constant is available
Frame Size (Type):
Fixed
Frame Size (bytes):
Enter the frame size. Frame sizes can be from 64bytes to 1518bytes, in addition to jumbo frames up to 9k bytes.
Bandwidth:
Configure the transmit rate for the stream
Note: The bandwidth allocation per stream is already configured in the General Settings tab, but can be modified in this screen as well.
For more information on Traffic Settings, please see 6.2.1.2 BERT Traffic Settings .
Throughput Traffic Settings
Go back to top Go back to TOC
6.5.1.4 Error Injection Settings (Per Stream Configuration)
Error injection can be performed during test. The type of errors and error injection are configured in the Error Injection tab. Once the test is running, error injection can be
performed by pressing the
Error Inject
button on the right side of the screen.
Stream #:
Select the stream to configure.
Error type:
Select from CRC or PCS Errored Block.
Injection Flow:
The error injection flow determines how the selected errors will be injected.
Single
Count:
Set a count using the numeric keypad.
Rate:
1E-3, 5E-4, 2E-4, 1E-4, 5E-5, 2E-5, 1E-5, 5E-6, 2E-6, 1E-6, 5E-7, 2E-7, 1E-7, 5E-8, 2E-8, 1E-8, 5E-9, 2E-9, 1E-9 or User Defined. The user may
configure the desired rate using the on screen keypad.
Throughput Error Injection Setup Keypad
Go back to top Go back to TOC
6.5.1.5 Alarm Injection Settings
UX400 10G e-Manual D07-00-058P RevA00 Page 89 of 209