![background image](http://html1.mh-extra.com/html/valco-melton/d10/d10_manual_849617075.webp)
MM113 - D10/D16 Hot Melt Unit
Section 5 - Setup
75
User Inputs and Outputs
There are 4 individual outputs that can be configured to control remote devices as set up by the user. An output relay
will turn on when the conditions of the selected feature are met. For example, if Output #1 is programmed for “System
Ready”, the output relay will energize when the control reaches temperature and is ready to glue. See the chart
below for user selectable output features.
There are also 4 individual inputs that can be configured to control something on the hot melt control when the control
receives a dry contact input. For example, if Input #3 is programmed for “Pump On/Off”, the pump will remain off until
input #3 receives a signal for it to turn on. This can be used to remotely control the glue pump.
See “Connections” in Section 4 - Installation for a detailed description of these features.
This parameter can be accessed in Password Level 3 or higher.
Inputs 1-4
Result when Input is ON
Result when Input is OFF
Disabled None
None
Setback
Puts the control into Setback mode
Takes the control out of Setback mode
Auto Setback/Standby
Resets the Auto Setback/Standby
Timeout timer
Allows the unit to enter Setback/Standby
mode if Timeout timer is exceeded
Control Power Off
Puts the control in Standby mode
Takes the control out of Standby mode
Pump On/Off
Enables the pump (pump must also be
enabled using the Pump On/Off key, or
by setting Automatic Pump Mode to ON)
Disables the pump
All Heaters On/Off
Enables the heaters for all zones
Disables the heaters for all zones
Hose & Gun #1 On/Off
Enables the heaters for Hose & Gun #1
Disables the heaters for Hose & Gun #1
Hose & Gun #2 On/Off
Enables the heaters for Hose & Gun #2
Disables the heaters for Hose & Gun #2
Hose & Gun #3 On/Off
Enables the heaters for Hose & Gun #3
Disables the heaters for Hose & Gun #3
Hose & Gun #4 On/Off
Enables the heaters for Hose & Gun #4
Disables the heaters for Hose & Gun #4
Hose & Gun #5 On/Off
Enables the heaters for Hose & Gun #5
Disables the heaters for Hose & Gun #5
Hose & Gun #6 On/Off
Enables the heaters for Hose & Gun #6
Disables the heaters for Hose & Gun #6
Melter On/Off
Enables the tank heaters
Disables the tank heaters
Summary of Contents for D10
