MM113 - D10/D16 Hot Melt Unit
Section 5 - Setup
81
Pump Configuration for Specific No. Pump
The Pump Heat Zone is the zone attached to the pump to heat the pump. It is used to make sure the zone is enabled
and heating when the pump switch is enabled.
Gramage should ONLY be enabled in coating applications where the user wants the unit to automatically calculate the
pump speed, to achieve a desired coat weight. It requires the user to enter the Pump Displacement (cc),
Adhesive Density (gram/cc), speed reference value if tach mode is used, coating width (mm) and the desired coating
weight (gram/m2). See
Gramage Feature
later in this section for more information.
Pump Setup Menu
The Speed Gain value is adjustable from 0-200%. It scales the pump speed when using Automatic Pump Mode, when
the pump speed is determined by the Auto Speed Input. The factory default setting is 100%.
The Creep Speed Setting is the speed that the pump will run when the Auto Speed Input is below the Minimum Speed
Setting. This setting is generally used to maintain pressure while the production line is stopped.
The Minimum Speed Setting determines the minimum line speed at which the pump turns at the creep speed setting.
The units are in either millivolts or ft./min depending on the Auto Speed Input type (Tach or Encoder).
Summary of Contents for D10
