MM113 - D10/D16 Hot Melt Unit
Section 5 - Setup
39
Control Panel, Continued
ITEM
NAME
DESCRIPTION
1
SYSTEM READY LED
ILLUMINATES GREEN WHEN THE SYSTEM REACHES READY
TEMPERATURE
2
WARNING LED
ILLUMINATES RED WHEN THE UNIT ENTERS AN ALARM CONDITION
3
SETBACK ON/OFF KEY
PUTS THE UNIT INTO AND OUT OF SETBACK MODE. THIS REDUCES
THE TEMPERATURE TO KEEP THE ADHESIVE SOFT BUT NOT
MOLTEN DURING DOWNTIME. YELLOW LED INDICATES THAT THE
SETBACK MODE IS INITIALIZED.
4
DISPLAY SCREEN
DISPLAYS THE MENU AND EVENT SCREENS
5
CLOCK ON/OFF KEY
TURNS THE CLOCK FUNCTION ON AND OFF. GREEN LED
INDICATES THE CLOCK IS ACTIVE.
6 STANDBY
KEY
PUTS THE UNIT IN AND OUT OF STANDBY. GREEN LED INDICATES
UNIT IS ON, ORANGE LED INDICATES UNIT IS IN STANDBY.
7
PLUS KEY
INCREASES THE VALUE OF THE SELECTED FIELD
8
RIGHT ARROW KEY
MOVES RIGHT THRU FIELDS ON THE SCREEN
9 OK
KEY
ENTERS OR EXITS A SCREEN WHERE A SELECTED FIELD CAN BE
EDITED.
10
MINUS KEY
DECREASES THE VALUE OF THE SELECTED FIELD
11
LEFT ARROW KEY
MOVES LEFT THRU FIELDS ON THE SCREEN
12
VALVE MENU KEY
SETS UP FUNCTIONS FOR VALVE DRIVER OPTION, IF ENABLED.
13
SETUP MENU KEY
DISPLAYS THE SETUP MENU SCREENS
14
TEMPERATURE MENU KEY
DISPLAYS THE TEMPERATURE GROUP SCREENS
15 GUN
LEDS
ILLUMINATES GREEN WHEN THE GUN ZONE IS HEATING AND RED
WHEN THE ZONE IS IN ALARM.
16 HOSE
LEDS
ILLUMINATES GREEN WHEN THE HOSE ZONE IS HEATING AND RED
WHEN THE ZONE IS IN ALARM.
17 TANK
LED
ILLUMINATES GREEN WHEN THE TANK ZONE IS HEATING AND RED
WHEN THE ZONE IS IN ALARM.
18
PUMP ON/OFF KEY
TURNS THE PUMP ON AND OFF. GREEN LED INDICATES PUMP IS
ACTIVE.
19
PUMP MENU KEY
DISPLAYS THE PUMP GROUP SCREENS
20
ABOVE OR BELOW
MINIMUM SPEED LEDs
APPLICABLE LIGHT ILLUMINATES WHEN SPEED IS ABOVE OR
BELOW MINIMUM SETTING.
21
LEVEL CONTROL LEDs
ALWAYS ON UNLESS LOW LEVEL OCCURS ON THE INTERNAL OR
EXTERNAL LEVEL CONTROL INPUTS.
Summary of Contents for D10
