VALCO MELTON D10, Manual

Page: 305 / 313

IS0299 - D Series Coupling Upgrade Procedure
1
IS0299 - D Series Coupling Upgrade Procedure
1/16
Important Information: Read Before Use
WARNING! Read and follow all instructions, warnings, tags, and labels before operating the equipment.
Only qualified personnel should perform this procedure. Use of this equipment in a manner
other than described in this instruction sheet and failing to follow all instructions could result in
personal injury, death, or damage to equipment.
All equipment is to be installed and all connections are to be made ONLY by qualified
personnel. Components and accessories are to be installed in accordance with the
instructions provided and applicable codes for the region installed. Failure to follow these
instructions could result in personal injury, death, or damage to equipment.
CAUTION! The instructions and guidelines in this instruction sheet are general guidelines. Always follow
the manufacturer’s documentation and instructions for each part of the system such as the
valve, the solenoid, the application mechanism, etc. Failure to follow these instructions could
result in damage to equipment.
WARNING! Equipment will be hot. Wear safety glasses and heat resistant gloves during this procedure.
Otherwise, personal injury may result.
See product manuals MM101 and MM113 for additional safety
guidelines
Tool Requirements
•
Ratchet Wrench
•
10mm Socket
•
13mm Socket
•
7/16 Socket
•
6 in. Drive Extension
•
Torque Wrench
•
3/32 Hex Key
•
1/8 Tee Handle Hex Key
•
2.5mm Hex Key
•
Wire Snips
•
Square
•
Safety Glasses
•
Heat Resistant Gloves