UINICS LV1000 Series, Instruction Manual

Page: 63 / 67

- 59 -
２．Status
① The view of status
Status has written the hexadecimal number by 2 bytes of character string.
② Status allotment
００ Normal communication.
０１ Communication fault.
３．Communication format Table 9
Measurement data lead
（Rate mete）
Command format ＠××ＲＤ１△△CR
Response format ＠××◇◇±０□□□□□△△CR
Measurement data read
（Ratio）
Command format ＠××ＲＤ２△△CR
Response format ＠××◇◇±０□□□□□△△CR
OUT1 preset-value read
Command format ＠××ＲＰ１△△CR
Response format ＠××◇◇±０□□□□□△△CR
OUT2 preset-value read
Command format ＠××ＲＰ２△△CR
Response format ＠××◇◇±０□□□□□△△CR
OUT3 preset-value read
Command format ＠××ＲＰ３△△CR
Response format ＠××◇◇±０□□□□□△△CR
OUT4 preset-value read
Command format ＠××ＲＰ４△△CR
Response format ＠××◇◇±０□□□□□△△CR
OUT1 preset-value write
Command format ＠××ＷＰ１±０□□□□□△△CR
Response format ＠××◇◇△△CR
OUT2 preset-value write
Command format ＠××ＷＰ２±０□□□□□△△CR
Response format ＠××◇◇△△CR
OUT3 preset-value write
Command format ＠××ＷＰ３±０□□□□□△△CR
Response format ＠××◇◇△△CR
OUT4 preset-value write
Command format ＠××ＷＰ４±０□□□□□△△CR
Response format ＠××◇◇△△CR
××・・・・・ID number ◇◇・・・・・Status
△△・・・・・Checksum □□□□□・・Indicated value data
＜Caution＞
1．A decimal point does not go into transmission and received data.
2．Indicated value data is set to“-9999”or“99999 (Ratio 9999)”when a main part display
is“ ― ― ― ― ― blink”in a measurement data read
！