UINICS LV1000 Series, Instruction Manual

Page: 55 / 67

- 51 -
※Please set up analog minimum／analog maximum adjustment at the time of with an analog output
option.
Ａ Ｂ Ｃ Ｄ Ｅ
Ｃ．１ ２ Ａ ０
１ ２ ３ ４ (bit-deta）
○ ○ ○ ○
Hold %
○ ○
When pushed, it becomes the analog minimum input value
adjustment.
The input value (bit-data) inputted now is displayed.
Ａ Ｂ Ｃ Ｄ Ｅ
Ｃ．１ ２ Ａ ０
１ ２ ３ ４ (bit-data）
○ ○ ○ ○
Hold %
○ ○
Please unite bit-data to become the minimum output value as
an output form(AV3 to 5，AI).
When pushed, it becomes an output increasing.
When pushed, it becomes an output decreasing.
The bit-data variable range of the analog minimum output
adjustment. 〔０７ｂ０ to １ｄ９０〕
Ａ Ｂ Ｃ Ｄ Ｅ
Ｃ．
１ ２ Ａ ０
During registration, it
blinks 3 times.
１ ２ ３ ４
○ ○ ○ ○
Hold %
○ ○
When pushed, the bit-data (output) in the
time will be registered as a maximum output.
As a signal registration, bit-data blink 3 times in about
1 sec.
＜Caution＞
Key operation cannot be carried out during bit-data
registration.
Ａ Ｂ Ｃ Ｄ Ｅ
ｄ．Ｅ ｄ ６ ０
１ ２ ３ ４(bit-data）
○ ○ ○ ○
Hold %
○ ○
When pushed, it becomes the analog maximum output
value adjustment.
The maximum output value (bit-data) outputted now is
displayed.
Ａ Ｂ Ｃ Ｄ Ｅ
ｄ．Ｅ ｄ ６ ０
１ ２ ３ ４(bit-data）
○ ○ ○ ○
Hold %
○ ○
Please unite bit-data to become the minimum output value as
an output form（AV3 to 5, AI）.
When pushed, it becomes an output increasing.
When pushed, it becomes an output decreasing.
The bit-data variable range of the analog maximum output
adjustment. 〔Ｅ２７０ to Ｆ８５０〕
Ａ Ｂ Ｃ Ｄ Ｅ
ｄ．
Ｅ ｄ ６ ０
During registration, it
blinks 3 times.
１ ２ ３ ４
○ ○ ○ ○
Hold %
○ ○
When pushed, the bit-data (output) in the
time will be registered as a maximum output.
As a signal registration, bit-data blink 3 times in about
1 sec.
＜Caution＞
Key operation cannot be carried out during bit-data
registration.
Mode
Mode
ENT
ENT
Mode
Mode
ENT
ENT
！
！