UINICS LV1000 Series, Instruction Manual

Page: 27 / 67

- 23 -
Analog input value
10V
-1000 0 5000 Rate meter indicated value 3000 1000
Area 0 function is invalidity
Area 0 function is effective
●・・・Light up ○・・・Light disappears
◎・・・Light blinks
The ratio indication is shown in the figure below. Fig.16
【Area“0”indication value：№⑦-⑧】
For two poins, domain“0”minimum indicated value and domain“0”maximum indicated value is
indicated by “0”.
Setting range：-9999 to 9999 <A decimal point is interlocked with the mode No.0>
＜Caution＞
Please do not carry out a setup of those other than
“Domain 0 minimum indicated value” ＜ “Domain 0 maximum indicated value”
It dose not function correctly.
[Example of setting of domain“0”]
Rate mete value to set between “1000” to “3000” of indicated value to “0”.
１ ２ ３ ４ Ａ Ｂ Ｃ Ｄ Ｅ
Domain 0 minimum indicated value ○ ○ ● ○ ０ １ ０ ０ ０ （１０００）
１ ２ ３ ４ Ａ Ｂ Ｃ Ｄ Ｅ
Domain 0 maximum indicated value ○ ○ ◎ ○ ０ ３ ０ ０ ０ （３０００）
Ａ Ｂ Ｃ Ｄ Ｅ
Mode No.1 １．Ｘ １ （Domain 0 function effective）
●・・・Light up ○・・・Light disappears
◎・・・Light blinks Ｘ・・・Arbitrary setting value
The rate meter indication at the domain 0 functional effective is shown in the figure below.
Fig.17
！