UINICS LV1000 Series, Instruction Manual

Page: 47 / 67

- 43 -
≪The key operation method of a linearization function≫
Operating key Display unit Operation procedure
Ａ Ｂ Ｃ Ｄ Ｅ
Ｌ ｎ．０ １ Ａ
↓ ↑
０ ０ ０．０ ０
１ ２ ３ ４
○ ○ ○ ○
Hold ％
○ ○
If a is pressed, it will become “ch1: input % value
setup”.
If a is pressed, it will return to the input title of
1ch.
※It functions by each ch of “Ln.01A”to”Ln.21A”
＜When key operation is used＞
Ａ Ｂ Ｃ Ｄ Ｅ
０ →０→０.→０→０
↑ ↓
└───────┘
１ ２ ３ ４
○ ○ ○ ○
Hold ％
○ ○
Moves the flash figure when each setting, to the right.
Whenever it pushes once, it moves to the right.
Ａ Ｂ Ｃ Ｄ Ｅ
０→
０ →０.→０→０
↑
└０ to ９
１ ２ ３ ４
○ ○ ○ ○
Hold ％
○ ○
When pushing. Change the blinkig numeral value.
Every press raises the value by ones.
┌ →０→１→・・・→９→ ┐
└─────────────┘
When pushing. Change the blinking numeral value.
Every press reduces the value by ones.
┌ →９→８→・・・→０→ ┐
└─────────────┘
The display range of the display for indication A is 0 to 1.
The display range of the display for indication B to D is 0
to 9.
＜Caution＞
Each should set up an input % value setup to 105.00% or
less at any cost.
When the value exceeding 105.00% is set up, output title
shift and registration cannot be performed.
＜When a teaching function is used＞
！
Mode
Mode
Mode