UINICS LV1000 Series, Instruction Manual

Page: 53 / 67

- 49 -
１６．The method of analog adjustment
＜Caution＞
Although adjusting according to a visitor`sspecification, when you carry out analog adjustment,
please chang according to the following procedure.
≪The call method≫
1．Power is switched on pushing , It becomes the ｢A2 to A5 ｣display.(Analog adjustment mode）
≪The key operation method of analog adjustment≫
Operating key Display unit Operation procedure
Ａ Ｂ Ｃ Ｄ Ｅ
Ａ ２
１ ２ ３ ４
○ ○ ○ ○
Hold ％
○ ○
A2 to A5 input range is switched whenever it presses a
┌ →Ａ２→Ａ３→・・・・→Ａ5→ ┐
└────────────────┘
Please choose the input range which suited specification.
A2 DC4 to 20mA input
A3
DC1 to 5V input
A4
DC0 to 5V input
A5 DC0 to 10V input
Ａ Ｂ Ｃ Ｄ Ｅ
Ａ ５
１ ２ ３ ４
○ ○ ○ ○
Hold ％
○ ○
When pushed, will register the input range currently
displayed.
When a range is made, a scaling preset value initializes.
Ａ Ｂ Ｃ Ｄ Ｅ
Ａ．０ １ ２ ３
１ ２ ３ ４(bit-data）
○ ○ ○ ○
Hold ％
○ ○
When pushed, it becomes the analog minimum input value
adjustment.
The input value (bit-data) inputted now is displayed.
Ａ Ｂ Ｃ Ｄ Ｅ
Ａ．
０ １ ２ ３
During registration, it
blinks 3 times.
１ ２ ３ ４
○ ○ ○ ○
Hold ％
○ ○
If a is pressed inputting the minimum of the
registered input range, the input value (bit-data) in the
time will be registered as a minimum input.
As a signal registration, bit-data blink 3 times in about
1 sec.
＜Caution＞
Key operation cannot be carried out during bit-data
registration.
Ａ Ｂ Ｃ Ｄ Ｅ
Ａ．０ １ ２ ３．
Lighting
１ ２ ３ ４
◎ ○ ○ ○
Hold ％
○ ○
When registered bit-data is checked,
It displays, while pressing the .
※When displaying bit-data registered,
The decimal point of a least significant digit lights up.
RST
Mode
Mode
ENT
ENT
Mode
Mode
！
！