UINICS LV1000 Series, Instruction Manual

Page: 45 / 67

- 41 -
（Indicated value）
0 adjustments by the
Indication 0 adjustments
Partial
indicated value
difference
１３.About the zero point adjustment
≪The method of zero point adjustment≫
When the zero poit adjustment of mode No.3“Effective”
Present display is adjusted “0”when pushing ＋ for 2 sec or more.
The adjusted deflection data is memorized.
Fig.21
＜Caution＞
１． When the zero poit adjustment of mode No.3“Invalidity”
The display is not adjusted“0”when pushing ＋ for 2 sec or more.
２．If the contents of a scaling setting are changed, since deflection data needs to be
adjusted, please readjust.
≪How to see the deflection data of zero point adjustment≫
The deflection data is displayed when pushing for 2 sec or more.
（It displays it only while it is pushing.）
[The example of a settint of zero point adjustment]
A rate mete indicated value performs zero point adjustment at the time of “50.00”.
The display of deflection data will be“-50.00”.
！