UINICS LV1000 Series, Instruction Manual

Page: 59 / 67

- 55 -
１８．The method of an 8 step preset value setup P10,12 option
The preset value (preset value) of an 8 step preset (ch1 to ch8) is set up.
The setting range is -9999 to 9999.
In addition, setting conditions differ by rate mete or ratio it output.
≪Calling method≫
1. It will became「 」display if“ “is pushed 2 sec or more.（Set list）
2. It will became「 」display if“ “is pushed 4 times.
3. If is pushed, it will become 8 step preset value setup and can perform a setup of ch1 to ch8.
≪The key operation method 8 step preset value setup≫
Operation key
Display unit Operation procedure
Ａ Ｂ Ｃ Ｄ Ｅ
９ ９ ９ ９
１ ２ ３ ４
● ○ ○ ○
Hold %
○ ●
Ch1 to ch8 setup is switched whenever it presses a
┌ →ｃｈ1→ｃｈ2→・・・・→ｃｈ8→┐
└─────────────────┘
The lamp corresponding to each preset value of ch1-ch8
lights up at the time of a change.
At the time of ch1 setup ％ lighting＋OUT1 lighting
At the time of ch2 setup ％ lighting＋OUT2 lighting
At the time of ch3 setup ％ lighting＋OUT3 lighting
At the time of ch4 setup ％ lighting＋OUT4 lighting
At the time of ch5 setup ％ lighting＋OUT1 lighting
At the time of ch6 setup ％ lighting＋OUT2 blink
At the time of ch7 setup ％ lighting＋OUT3 blink
At the time of ch8 setup ％ lighting＋OUT4 blink
Ａ Ｂ Ｃ Ｄ Ｅ
(-)→
９ →９→９→９
↑ │
└─←───←─┘
１ ２ ３ ４
●→○→○→ ○
Hold %
○ ●
Moves the flash figure when each setting, to the right.
Whenever it pushes once, it moves to the right.
Mode
Mode
Mode
Mode