- 32 -
Mode No. Preset output :Common setting(2)
5
A B C D E
5.0 0 0 0
Hysteresis value (OUT1 to 4)
0000 to 3999
[ Hysteresis value ]
Hysteresis operation is performed with any set-up value from 0000 to 3999
(4 figures which disregarded the decimal point) to the preset value of OUT1 to 4.
The value to set up is set up with an indicated value regardless of a rate/ratio
indication.
<Caution>
1. By setup of“Hysteresis operation”of OUT1 to 4(Mode №6 to 9),if it
chooses “1:Effective”,it will operate.
When a hysteresis value is“0000”, all of OUT1 to 4 serve as the same
operation as“0:Invalidity”.
2.Please be sure to choose“0:comparison”by“output mode”setup of OUT1 to 4
(Mode №6 to 9)in hysteresis operation.
It does not function in “1:Holding”
3.The hysteresis value is a common setting value to OUT1 to 4.
When “Rate meter”as “Ratio”is separately chosen by “output display
selection”setup of OUT1 to 4.
Hysteresis operation is carried out with the value concerned and set as
the indicated value range.
When carrying out hysteresis operation, it becomes use by either a
ratemeter or ratio.
【The timing chart at the time of hysteresis operation effective 】 Fig. 20
A shadow area is a portion of a hysteresis value.
Indicator
Time
Upper bound
comparison output
Lower bound
comparison output
Lower bound
comparison
(
Delay
)
Hysteresis value
Preset value
Hysteresis value
!
Summary of Contents for LV1000 Series
