- 42 -
１４．Linearization function
The output (indicated value) set up to the input set up arbitrarily is carried out.
An input and output can carryout a 21-channel (ch) setup of the setup.
≪Linearization function≫
[Use of a linearization function]
The use of a linearization function should choose“1：Linearization operation”by
“Calculation function”of the mode No.0
[Input % value setup]
It sets up at a rate（％）of a full-scale input.
There are kinds of setting methods. Key operation and the teaching function to take in an
analog input signal directly. A setting range is 0.00 to 105.00%.
Table 7
Form
0.00％
to
100.00％
to
105.00％
Ａ２
4.000mA
to
20.000mA
to
20.800mA
Ａ３
1.000V
to
5.000V
to
5.200V
Ａ４
0.000V
to
5.000V
to
5.250V
Ａ５
0.000V
to
10.000V
to
10.500V
＜Caution＞
1. While using key operation, it can change into the value of 105.00% or more, but shift to the
next ch and registration cannot beperformed. Please be sure to set up with less than
105.00% values.
2. When a teaching function is operated at less than 0.00％ and 105.00％ or more at the time
of use, it becomes registration at the minimum and the maximum.
3. By ch, when an input ％ value setup is the same, output indicated value setup of a front row
ch setup becomes effective.
（Example：When ch03,11 and 19 are the same, an output indicated value setup of ch03 is
effective.）
4. An input ％ value setup “000.00”is input data of 0％、and is not ch skip setup.
A setup of at least one “000.00”setup will operate linearization between 0％ and the
latest input ％ value setup.
When linearization wants to function, without going via 0% of input %setup, it has inputt
ed except 0%, and also please input an input value setup which overlapped with ch.
(Keep in mind that an output indicated value setup in the front row ch becomes effective.）
[Output indicated value setup]
It sets up with an indicated value.（Key operation input）
Setting range, -9999 to 9999（A decimal point is interlocked with mode No.0）
≪How to call≫
1．It will become” “ displays if a is pressed 2 sec or more.（Setting list）
2．Please push a 3 times and make it “ “display.
3．If a is pressed, it will become a Rinaraizu setup and can perform a setup of ch1 to ch21.
Mode
Mode
！
Summary of Contents for LV1000 Series
