UINICS LV1000 Series, Instruction Manual

Page: 40 / 67

- 36 -
Mode No. Analog output：Setting of output indicated selection・output system(Oprion：AV3 to AV5/AI）
Ａ
※It functions at the time of with option AV3 to AV5 / AI
Ａ Ｂ Ｃ Ｄ Ｅ
Ａ．０ １
Output system
０：Synchronizes for the display
１：Synchronizes for the measurement
Output indicated selection
０：Rate meter
１：Ratio
［ Output system ］
The output system of an analog output is set up.
０：Synchronizes for the display
Analog output to the shown value renewed every shown sampling time.
When external input is functioning,
Analog output to the shown value indicated at present.
For example when a peak hold is functioning, analog output by the present shown value
(Peak hold value).
１：Synchronizes for the Meeasurement
Analog output to the value renewed every time for sampling.
“0：Synchronizes for the display”difference, external input functioning,
When external input is functioning. Isn`t the display value.
Is output similarlywith the result calculated every sampling time.
［ Output indicated selection ］
It is chosen to which indicated an analog output is carried out.
０：Rate meter
An analog output is carried out to rate meter indicated value.
１：Ratio
An analog output is carried out to ratio indicated value.
Please refer to“16.How to adjust an analog output”(pages 49-53)and“10.Scaling
setting method”(pages 21-26 )
when you adjust the analog output.