UINICS LV1000 Series, Instruction Manual

Page: 11 / 67

- 7 -
４. Connecting terminal board
≪Terminal boards≫ Fig.4
［EXT.input (Terminal board 6-7）］
Hold/Peak hold/bottom hold/width of input/0 adjustment function.
Mode setting (P.30-31 “mode3”) (selectable)
［8 step preset output（option）］
Please refer to P.54“17. 8 step preset output”for the pin layout and the circuit specification.
［Communication function（option）］
Please refer to P.57-59“19.Communication function”for the pin layout and the circuit
specification.
≪Sensor boads≫
1）2-wire transmission type sensor Fig.5 2）3-wire type sensor Eig.6
3）4-wire type sensor Fig.７
＜Caution＞
The input circuit is connected with the sensor power ＧＮＤ inside.
Please carry out floating of the input circuit, and when used, consult to our company.
！