UINICS LV1000 Series, Instruction Manual

Page: 33 / 67

- 29 -
Mode No. Setting the least significant digit correction/domain“0”indication function
１
Ａ Ｂ Ｃ Ｄ Ｅ
１．０ ０
Domain“0”indication function
０：Function is invalid.
１：Function is effective.
Least significant digit correction
０：Real
１：Fixed at 0
２：0 or 5
［ Domain“0”indication function ］
Pleas use it, when indication “0”on the domain between any maximum value and the
minimum value.
０：Function is invalid.
Domain“0”indication function becomes invalid and dose not function.
１：Function is effective.
Domain“0”indication function becomes effective.
It functions by setup of domain 0 minimum / the maximum indicated value of a
scaling setup. （P.21 to 26 Reference）
［ Least significant digit correction ］
The form of indication for the least significant digit(digit on the right end)is
selected.
０：Real
Synchronized at the sampling time.
１：Fixed at 0
Always,“0”.
２：0 or 5
0-4 are expressed as 0, and 5-9 as 5.
Mode No. Setting the sampling time
２
Ａ Ｂ Ｃ Ｄ Ｅ
２． １．０
Sampling time
0.1-10.0 seconds(0.0 is 10.0 sec.）
［ Sampling time ］
Input signals are read by this time, and its average value is calculated and
indicated.
Use this setting for preventing flickering and for stabilizing indications.
＜Caution＞
It becomes effective after the samplint duration before it changes ends when
thesampling duration is changed.
！